86-17708476248

EN
جميع الاقسام

INCOLOY

أنت هنا : الصفحة الرئيسية>المنتجات>المواد المستخدمة:>INCOLOY

  • https://www.alloy-ronsco.com/upload/product/1634194019601194.jpg
  • https://www.alloy-ronsco.com/upload/product/1634194024957134.jpg
  • https://www.alloy-ronsco.com/upload/product/1634194024717078.jpg
  • 1
  • 2
  • 3

الصين الصانع الخاصة الصلب عالية الجودة سبائك النيكل Incoloy 800 الأنابيب ورقة لوحة بار

The Cr content in incoloy800 alloy is usually 15-25%, nickel content is 30-45%, and contains a small amount of aluminum and titanium. The 800 alloy is in the austenite single zone after high temperature and rapid cooling, therefore, the use state is a single austenite structure. The alloy has a high chromium content and a sufficient nickel content, so it has a high resistance to high temperature corrosion, and is widely used in industry. In chloride, low concentration NaOH aqueous solution and high temperature and high pressure water, it has excellent stress corrosion cracking resistance, so it is used to manufacture stress corrosion cracking resistance equipment.

  • نبذة عن المنتج:
  • استفسار

Model: INCOLOY 800/800H(UNS N08800)
الماركة: RONSCO
Code: Alloy1996INCOY800H


Incoloy 800 is an alloy with Cr content usually 15-25%, nickel content 30-45%, and a small amount of aluminum and titanium.

Incoloy 800 has anti-oxidizing medium corrosion, and has good kang carburizing performance at high temperature. Uses: Heat exchanger, steam generator tube, etc. The temperature resistance can reach 1100°C.

Incoloy 800/800H
ASTM B 409, B 408, B 407, B 564
رقم UNS N08800
Other common names: Alloy 800, Alloy 800H, Inconel 800, Alloy 800HT

Incoloy 800, 800H, and 800HT are nickel-iron-chromium alloys with good strength and excellent resistance to oxidation and carburization in high-temperature exposure. These nickel steel alloys are identical except for the higher level of carbon in alloy 800H, and the addition of up to 1.20 percent aluminum and titanium in alloy 800HT. Incoloy 800 was the first of these alloys and it was slightly modified into Incoloy 800H. This modification was to control carbon (.05-.10%) and grain size to optimize stress rupture properties. Incoloy 800HT has further modifications to the combined titanium and aluminum levels (.85-1.20%) to ensure optimum high temperature properties.The nickel alloy is dual certified (800H/HT) and combines the properties of both forms. Incoloy 800H/HT alloy was intended for high temperature structural applications. The nickel content makes the alloys highly resistant to both chloride stress-corrosion cracking and to embrittlement from precipitation of sigma phase. The general corrosion resistance is excellent. In the solution annealed condition, alloys 800H and 800HT have superior creep and stress rupture properties.

In what forms is Incoloy 800H/HT?
ورقة
طبق
 شريط
الأنابيب والأنابيب (ملحومة وغير ملحومة)
التركيبات (على سبيل المثال ، الفلنجات ، والستائر المنزلقة ، والستائر ، وأعناق اللحام ، والمفاصل ، وأعناق اللحام الطويلة ، ولحامات التجويف ، والمرفقين ، والمحملات ، والنهايات ، والمرتجعات ، والقبعات ، والصلبان ، والمخفضات ، وحلمات الأنابيب)
What are the characteristics of Incoloy 800H/HT?
High temperature strength
High creep rupture strength
Resistant to oxidation and carburization in high temperature environments
Good corrosion resistance in many acidic environments
Good resistance to many sulfur-containing atmospheres

Alloy 800 (UNS N08800) Chemical Composition( %)

Ni Cr Fe C Al Ti شركة + تي
30.0-35.0 19.0-23.0 39.5 دقيقة .10 max .15-.60 .15-.60 . 30-1.20


Alloy 800H (UNS N08810) Chemical Composition(%)

Ni Cr Fe C Al Ti شركة + تي
30.0-35.0 19.0-23.0 39.5 دقيقة .05-.10 .15-.60 .15-.60 . 30-1.20


Alloy 800HT (UNS N08811) Chemical Composition( %)

Ni Cr Fe C Al Ti شركة + تي
30.0-35.0 19.0-23.0 39.5 دقيقة .06-.10 .25-.60 .25-.60 0.85-1.2

*Note that the chemical composition of Incoloy 800HT will always be within the limits of Incoloy 800H.
*Note the limits of Incoloy 800H may or may not be within the limits of Incoloy 800HT.

In what applications is Incoloy 800H/HT used?
Ethylene furnace quench boilers
Hydrocarbon cracking
Valves, fittings and other components exposed to corrosive attack from 1100-1800° F
Industrial furnaces
Heat-treating equipment
Chemical and petrochemical processing
Super-heater and re-heaters in power plants
أوعية الضغط
المبادلات الحرارية


Alloys 800H/HT are used in a variety of applications involving exposure to corrosive environments and high temperatures such as heat treating equipment, chemical and petrochemical processing, nuclear power plants and the paper pulp industry. Heat-treating equipment such as baskets, trays, and fixtures employ Incoloy 800H/HT. Chemical and petrochemical processing industries use the alloys for heat exchangers and other piping systems in nitric acid media especially where resistance to chloride stress-corrosion cracking is required. Power plants use them for super-heater and re-heater tubing.

مواصفات ASTM

أشابة الأنابيب Smls الأنابيب الملحومة أنبوب Smls أنبوب ملحوم ورقة لوحة شريط تزوير مناسب
Alloy 800 (UNS N08800) B407 B154 B163 B515 B409 B408 B564 B366
Alloy 800H (UNS N08810) B407 B154 B163 B515 B409 B408 B564 B366
Alloy 800HT (UNS N08811) B407 B154 B163 B515 B409 B408 B564 B366

خصائص الميكانيكية
درجة حرارة الغرفة النموذجية خصائص الشد للمواد الصلبة

المنتجات الشد (ksi) .2٪ العائد (ksi) استطالة (٪)
قضيب وبار 75-100 30-60 60-30


للتواصل معنا