جميع الاقسام


أنت هنا : الصفحة الرئيسية>المنتجات>المواد المستخدمة:>مونيل

  • https://www.alloy-ronsco.com/upload/product/1633942706428081.jpg
  • https://www.alloy-ronsco.com/upload/product/1633942724439757.jpg
  • https://www.alloy-ronsco.com/upload/product/1633942724521322.jpg
  • https://www.alloy-ronsco.com/upload/product/1633942724835614.jpg
  • https://www.alloy-ronsco.com/upload/product/1633942724510370.jpg
  • https://www.alloy-ronsco.com/upload/product/1633942724948793.jpg
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6

الصين مصنع خاص سبائك النيكل الصلب عالية الجودة مونيل K-500 لتجهيز الأغذية البيئية للبتروكيماويات والتكرير

Monel K-500 (N055000) Monel alloy is a corrosion-resistant alloy with the largest consumption, the most versatile and excellent comprehensive properties. This alloy has excellent corrosion resistance in hydrofluoric acid and fluorine gas media, and also has excellent corrosion resistance to hot concentrated lye.
The chemical composition of Monel K-500 (N055000) Monel alloy is mainly composed of 30% Cu and 63% Ni plus a small amount of Fe (1%-2%). Compared with monel400, aluminum and titanium are added.
Monel K-500 alloy has corrosion resistance equivalent to 400, but has higher mechanical strength and hardness. It has good thermal corrosion resistance and long-term structural stability. Mainly used to manufacture turbine blades and gas turbine blades on aero engines whose working temperature is below 750℃ ; used to manufacture fasteners and springs on ships; pump and valve parts on chemical equipment ; scraper blades on papermaking equipment Wait.

  • نبذة عن المنتج:
  • استفسار

Model: Monel K-500 (UNS N05500)
الماركة: Ronsco

RONSCO ALLOY K-500 Parameter Table
MONEL® K-500, UNS N05500, W.Nr.2.4375, NiCu30Al
مقدمة عامة
Monel K500 is a precipitation-hardenable Ni-Co alloy that combines the excellent corrosion resistance characteristic of Monel 400 with the added advantage of greater strength and hardness. These amplified properties, strength and hardness, are obtained by adding AL and Ti to the Ni-Co base and by a thermal processing used to effect precipitation, typically called age hardening or aging. When in the age-hardened condition, Monel K-500 has a greater tendency toward stress-corrosion cracking in some environments than Monel 400. Alloy K-500 has approximately three times the yield strength and double the tensile strength when compared with alloy 400. Plus, it can be further strengthened by cold working prior to precipitation hardening. The strength of this nickel based alloy is maintained to 1200° F but stays ductile and tough down to temperatures of 400° F. Its melting range is 2400-2460°F.

This nickel alloy is spark resistant and non-magnetic to -200°F. However, it is possible to develop a magnetic layer on the surface of the material during processing. Al and Co may be selectively oxidized during heating, leaving a magnetic nickel rich film on the outside. Pickling or bright dipping in acid can remove this magnetic film and restore the non-magnetic properties.

التركيب الكيميائي:
وصف المنتجCSi MnSNiCrCoMoCuFeBiAlTiBشركة + تي
اقل شئ



2.30 0.35 

اكثر شئ0.18 0.50 1.50 0.01

33.00 2.00 
3.15 0.85 

النماذج والمواصفات
Sheet, Plate, Strip:
BS3072 NA18
DIN 17750
ISO 6208
Bar, Rod:
AMS 4676
أستم بكسنومكس
BS3076 NA18
DIN 17752
ISO 9723 / ISO 6208
BS3076 NA18
ISO 9724
DIN 17753
DIN 17754
ISO 9725
UNS N05500, BS6076 NA13, Trade name Monel® Alloy K-500, Werkstoff Nr. 2.4375, MIL-N-24549, NACE MR-01-75
الخصائص الفيزيائيةتطبيق:
Density: 8.44g/cm³, 0.305lb/in³
Alloy K-500 can be hardened by cold working and by heat treating, supplied in half hard and full hard temper.

Mean Coefficient of Thermal Expansion: in/in/°F (mm/m/°C):
70 - 212 درجة فهرنهايت (20 - 100 درجة مئوية): 7.6 × 10-5 (13.7)
Modulus of Elasticity: KSI (MPa):  26 x 10³ (179 x 10³) in Tension
Magnetic Permeability, H=200: Annealed <1.002
Melting Point: 2460 °F (1350 °C) approx.
Pump components,
شفرات دكتور وكاشطات
Oil well drill collars and cable wrap
Marine instruments
مكونات الكترونية
Valve tray
Submarine parts 
Typical  Mechanical Property Ranges:
Form & Conditionقوة الشدقوة العائد 0.2٪ تعويضاستطالة ٪
عسر الماء
قضيب وبار

      تشطيب ساخن 90-155621-106940-110276-75845-20140-315 75B-35C
      Hot-Finished, Aged140-190965-1310100-150 690-103430-20 265-346 27-38C
      Hot-Finished, Annealed90-110621-75840-60 276-41445-25 140-185 75-90B
      Hot-Finished, Annealed and Aged130-165 896-1138 85-120586-82735-20250-315 24-35C
      مسحوب على البارد ، كما رسم100-140690-965 70-125 483-862 35-13175-260 88B-26C
      Cold-Drawn, Aged135-185 931-1276 95-160 655-1103 30-15255-370 25-41C
      Cold-Drawn, Annealed90-110 621-758 40-60276-41450-25140-18575-90B
      Cold-Drawn, Annealed and Aged130-190 896-131085-120 586-82730-20250-315 24-35C
Sheet, Cold-Rolled, Annealed90-105 621-724 40-65 276-44845-25-85B max
Strip, Cold-Rolled

      صلب90-105621-724 40-65 276-448 45-25-85B max
      Annealed and Aged130-170 896-117290-120621-827 25-15-24C min.
      تطبيع الربيع145-165 1000-1138 130-160896-1103 8-3-25C min.
      Spring Temper, Aged170-2201172-1517130-195 896-1345 10-5-34C min.
Tube and Pipe, Seamless

      Cold-Drawn, Annealed90-110621-758 40-65 276-448 45-25- 90B كحد أقصى.
      Cold-Drawn, Annealed and Aged130-180 896-124185-120 586-82730-15-24-36C
      مسحوب على البارد ، كما رسم 110-160758-110385-140 586-965 15-2- 95B-32C
      Cold-Drawn, As-Drawn, Aged140-220965-1517100-200690-1379 25-3-27-40C

      تشطيب ساخن90-135 621-931 40-110 276-758 45-20 140-260 75B-26C
      Hot-Finished, Aged140-180 965-1241100-135 690-98130-20 265-337 27-37C
Wire, Cold Drawn

      صلب 80-110 552-758 35-65 241-44840-20--
      Annealed and Aged120-150 827-103490-110 621-758 30-15--
      تطبيع الربيع 145-190 1000-1310 130-180896-12415-2--
      Spring Temper, Aged160-200 1103-1379140-190 965-1310 8-3--

ميزة رونسكو
1,سعر أقل من أوروبا والولايات المتحدة الأمريكية 20 ~ 30٪.
2,100% quality guaranty because we remelt by VIM+ESR.
2,أفضل خدمة: 0 دفع إذا لم يكن الاختبار على ما يرام. 
3,0 fee for UT, PT. 
4,موك منخفض للمواد الجديدة: 200 كجم.
5,سريع 20 إلى 30 يومًا من المهلة الزمنية للمواد الجديدة.

For More Information About Monel K-500 (UNS N05500/ W.Nr. 2.4375) Pipes, Plates, Tubes, Sheets, Bars , please call +86 17708476248 or Send an Email to [[البريد الإلكتروني محمي]]

للتواصل معنا